Vulcan’s Flame

A geometric wall of fire burning on the sands of the Black Rock Desert. This immobile blaze stands as an edifice to Burning Man’s original figurehead. A burning yet fireless wall of plywood and acetate that can be encountered, entered and sheltered in.

This sculpture stands as an abstract image of flames sent by Vulcan the Roman God of fire, an emblem of the festival’s name. Created from a series of plywood shapes and acrylic, Vulcan’s Flame is a blazing wall of light and colour. The structure is created to both imitate and juxtapose chemical fire, sharing real fires beauty but opposing its destructive tendencies. The sculpture is designed as a wall of shelter, behind which burners can be shielded from the desert’s unforgiving sun.

Born from Ancient Egyptian ‘Cairo tiling’, the sculpture is created from morphing polyhedra. The lowest section of the fire is created from cubes which gradually deform into rhombic dodecahedrons – a cubist interpretation of a flames movement. Internally every shape is painted to mimic fire’s bright hues and coloured acetate panels within the wall will project red and yellow tones onto the surrounding desert floor. At night internal spotlights will illuminate the entire structure, creating a glowing inferno of colour. These lights will flicker to create the illusion of movement.

Visually the main structure consists of three main forms;

• The outer zone: the sparse cubic section of the sculpture, representing the hottest part of a flame, the region of complete combustion
• The middle zone: this is the central area in which the cubic deformation begins to occur.
• The inner zone: this is the coolest space, the most densely packed red area of the sculpture. Burners can crawl into this space – sheltered by four layers of dodecahedrons.

Physical Description:

Vulcan’s Flame is a long, low plywood structure, the installation is the geometric interpretation of a flame, a curving sculpture of deforming polyhedral that slowly transform from a cube to a rhombic dodecahedron. The sculpture is created from 55 plywood polyhedra constructed from hand cut plywood boards and secured with cable ties. Internally each shape is painted using natural, organic paints, as the shapes change their internal colour alters from yellow to red. Coloured acetate panels in the uppermost faces of each shape will mirror the shapes internal hue, these panels will allow sunlight through during the day casting beautiful coloured shadows on the desert floor. At night the sculpture will be lit internally with fluctuating spot lights, this will create the illusion of flickering movement. The acetate panels will be secured with nails.

The structure sits on a base of 23 plywood shapes, secured to the ground with rebar stakes. The sculpture is very stable as the base is the widest section, the rest of the sculpture tapers away towards the top. Each new shape rest on the 4 corners of the shapes below, bolted through the vertices and then secured with rope. The final and highest rhombic dodecahedron is stabilised with a steel column. The highest point on the entire structure is just over 11 feet above ground level and consists of 4 stacked shapes. A full sized version of one of the shapes has already been constructed and load tested confirming that it can support human weight, all of the cable ties securing the structure will be meticulously rubbed down to ensure they are not sharp.

The sculpture curves in a gentle arc – creating a central area of shelter from the wind and sun. At ground level Burners can crawl inside the structure and rest in it’s shady, tinted interior.

Inspired by previous research of pyritohedrons, these structures are an addition to a series of other models based on polyhedral deformation. Previous models have experimented with density, altering colour and infill panels.